AI APIs & Cloud Stack

Compare multi-provider LLM API costs, context caching savings, and quota fallback sizing.

Interactive Modules in This Silo (27)

Calculator Confidence 85%

LLM Speculative Decoding Speedup & Draft Model Efficiency Calculator

Speculative decoding speedup is calculated as: Speedup = 1 + E[# accepted tokens] / (1 + Cd/Cv), where Cd is drafting cost and Cv is verification cost. Speedup depends critically on acceptance rate (α ≥ 0.6 recommended for 2x+ gains), draft model efficiency, and batch size. Gains diminish at high batch sizes where GPU utilization is saturated. Small models (<3B) often experience slowdowns due to high relative drafting overhead.

TTL 30d Open Simulator
Calculator Confidence 85%

LLM Fine-Tuning Dataset Size & GPU Memory Overhead Estimator

Fine-tuning LLMs requires significantly more VRAM than inference due to optimizer states, gradients, and activations. A 7B parameter model in FP16 with standard AdamW requires roughly 112 GB for full fine-tuning, while PEFT/QLoRA methods significantly reduce this by freezing base weights and using lower-precision optimizer states.

TTL 30d Open Simulator
Calculator Confidence 85%

LLM API Request Batching Throughput vs Latency Trade-off Calculator

Evaluate the LLM inference trade-off between batch size, system throughput (tokens/sec), and request latency. Larger batches improve GPU utilization and tokens per second up to the hardware saturation knee, but increase per-request end-to-end latency. Note: The calculator uses simplified heuristic models for demonstration purposes as exact latency depends on specific hardware, model architecture, and KV cache management.

TTL 30d Open Simulator
Calculator Confidence 100%

LLM Context Window Overflow & Truncation Strategy Calculator

Evaluate whether your LLM prompt stack fits within your model's shared context window. This tool models input tokens, output reserves, and safety margins to calculate token deficit or surplus, warning you when context exceeds 75% (compaction trigger) or 100% (overflow risk) capacity.

TTL 30d Open Simulator
Hybrid Confidence 95%

Llama.cpp Flash Attention CPU Memory Savings & Compatibility Checker

Enabling flash attention (-fa) in llama.cpp eliminates the N×N attention score matrix materialization in memory, yielding massive VRAM and context buffer savings at long contexts (32K+). This tool verifies your CPU/GPU backend KV cache type compatibility, identifies quantization restrictions, and estimates memory reduction.

TTL 30d Open Simulator
Calculator Confidence 100%

Anthropic Claude Prompt Caching TTL & Cost Estimator

Anthropic Claude prompt caching reduces repeated input token costs by up to 90%-97.5% using cache reads priced at 0.025x to 0.1x base rates. Writing to cache incurs a 1.25x premium for the default 5-minute TTL or 2x for the 1-hour TTL. Break-even typically occurs within 2 to 3 cache hits, depending on the model and TTL selection.

TTL 30d Open Simulator
Calculator Confidence 85%

vLLM PagedAttention KV Cache Block Size and GPU Memory Calculator

vLLM PagedAttention eliminates traditional monolithic KV cache waste by partitioning cache into fixed-size blocks (default 16 tokens). For a 70B model with 80 layers, 8 KV heads, 128 head size, and FP16 precision, each block requires 655,360 bytes (640 KB). Managing cache block pools allows significantly higher concurrent request density compared to pre-allocated monolithic buffers.

TTL 30d Open Simulator
Calculator Confidence 100%

Anthropic Claude Prompt Caching Cost Savings & Break-Even Calculator

Claude prompt caching requires a 1.25x write multiplier for the default 5-min TTL (or 2x for 1-hr TTL) and offers cache reads at 0.1x base input (with lower rates for specific models like Opus 5.5/Sonnet 5.5 at 0.05x and Fable 5.1/Mythos 5.1 at 0.025x). For a 6,000-token prefix at a $3/M base rate, 5-minute caching is cheaper than uncached input starting on the 2nd request.

TTL 30d Open Simulator
Calculator Confidence 85%

Together AI and Fireworks AI Serverless Cold Start Latency Estimator

Serverless cold starts can add 5-30 seconds to initial requests due to container spin-up, model download, and initialization overhead. While Together AI and Fireworks AI optimize for speed, cold starts occur when scaling from zero. Evidence shows container startup overhead (5-10s) plus model weight loading time based on disk throughput and model size. Fireworks can avoid cold starts by provisioning capacity proactively or using min-replica-count > 0.

TTL 30d Open Simulator
Calculator Confidence 75%

Kubernetes GPU Node Autoscaling & Pod Density Calculator

To maximize GPU density, ensure pod GPU requests equal limits (as required by NVIDIA device plugin). A node can host N pods where N ≤ total node GPU capacity. The scheduler calculates effective GPU requests as the sum of all non-init container GPU requests. If total pod requests exceed node capacity, the cluster autoscaler triggers scale-out. GPU requests and limits must be equal for nvidia.com/gpu resources.

TTL 30d Open Simulator
Calculator Confidence 100%

LLM Quantization Bits per Weight VRAM and Perplexity Tradeoff Estimator

Calculate accurate LLM weight memory footprint using VRAM = (Parameters * Bits / 8) * 1.20 plus KV cache and overhead. Moving from 16-bit BF16 to 4-bit INT4 reduces weight memory by approximately 75% while introducing manageable perplexity noise, though real-world 4-bit implementations typically consume ~0.6 bytes/param due to per-block scaling and metadata.

TTL 30d Open Simulator
Calculator Confidence 100%

Azure OpenAI Rate Limit RPM, TPM & Token Bucket Calculator

Azure OpenAI enforces dual metering via Tokens-Per-Minute (TPM) and Requests-Per-Minute (RPM). RPM is often derived proportionally at 6 RPM per 1,000 TPM, though ratios vary by model. A request's estimated token count for rate limiting includes prompt tokens, the max_tokens parameter, and the best_of parameter. Exceeding either limit, or violating sub-minute sliding window distribution, triggers an HTTP 429 Too Many Requests response.

TTL 30d Open Simulator
Compatibility Confidence 100%

LLM Quantization Bits Per Weight & VRAM Compatibility Checker

To calculate LLM weight memory, use parameters (B) × bits-per-weight ÷ 8. Add a 20% overhead buffer (× 1.2) for KV cache and runtime. GGUF offers fixed K-quants (1.56 to 8.5 bpw) for universal CPU/GPU use, while EXL2 supports arbitrary bit-widths (2.0 to 8.0 bpw) for precise NVIDIA VRAM targeting.

TTL 30d Open Simulator
Calculator Confidence 95%

LLM Model Quantization Bits per Weight VRAM & Perplexity Calculator

Calculate accurate VRAM weight footprints and perplexity impact for LLMs. A 70B model at Q4_K_M (~4.8 effective bits/weight) requires ~42 GB of VRAM, whereas specialized 3-bit formats like ITQ3 can fit a 70B model into ~27.3 GiB, enabling single-GPU inference on 32GB consumer hardware.

TTL 30d Open Simulator
Calculator Confidence 100%

Embedding Model Dimension vs Vector DB Storage & Latency Calculator

Vector database storage scales linearly with embedding dimensions. For float32 precision (4 bytes per value), 1 million vectors require ~1.5 GB at 384 dimensions, ~6.1 GB at 1536 dimensions, and ~12.3 GB at 3072 dimensions, directly driving cloud infrastructure costs and search latency.

TTL 30d Open Simulator
Verified modules comparison matrix for AI APIs & Cloud Stack
Module Mode Quality Score Last Verified Evaluations
LLM Speculative Decoding Speedup & Draft Model Efficiency Calculator Calculator 100/100 2026-11-22 0
vLLM Tensor vs Pipeline Parallelism GPU Memory & Latency Calculator Calculator 100/100 2026-11-20 0
LLM Fine-Tuning Dataset Size & GPU Memory Overhead Estimator Calculator 100/100 2026-11-19 0
LLM API Request Batching Throughput vs Latency Trade-off Calculator Calculator 100/100 2026-11-19 0
LLM Context Window Overflow & Truncation Strategy Calculator Calculator 100/100 2026-11-18 0
Cloudflare Workers AI Memory and Execution Timeout Sizing Calculator Calculator 100/100 2026-11-18 0
Whisper Audio Chunk Length, Token Duration & Batch Size Calculator Calculator 100/100 2026-11-18 0
Llama.cpp Flash Attention CPU Memory Savings & Compatibility Checker Hybrid 100/100 2026-11-18 0
Anthropic Claude Prompt Caching TTL & Cost Estimator Calculator 100/100 2026-11-18 0
vLLM PagedAttention KV Cache Block Size and GPU Memory Calculator Calculator 100/100 2026-11-18 0
Anthropic Claude Prompt Caching Cost Savings & Break-Even Calculator Calculator 100/100 2026-11-17 0
Together AI and Fireworks AI Serverless Cold Start Latency Estimator Calculator 100/100 2026-11-17 0
Kubernetes GPU Node Autoscaling & Pod Density Calculator Calculator 100/100 2026-11-17 0
Cloud GPU NVLink vs PCIe Interconnect & Training Bottleneck Calculator Calculator 100/100 2026-11-17 0
Cloud TPU vs GPU Cost & Performance Calculator for LLM Fine-Tuning Calculator 100/100 2026-11-17 0
LLM Quantization Bits per Weight VRAM and Perplexity Tradeoff Estimator Calculator 100/100 2026-11-17 0
Azure OpenAI Rate Limit RPM, TPM & Token Bucket Calculator Calculator 100/100 2026-11-17 0
LLM Quantization Bits Per Weight & VRAM Compatibility Checker Compatibility 100/100 2026-11-17 0
LLM Model Quantization Bits per Weight VRAM & Perplexity Calculator Calculator 100/100 2026-11-16 0
Groq LPU vs GPU Inference Throughput & Latency Calculator Hybrid 100/100 2026-11-16 0
DeepSeek MoE Active Parameter Token Cost and KV Cache Memory Estimator Calculator 100/100 2026-11-15 0
Embedding Model Dimension vs Vector DB Storage & Latency Calculator Calculator 100/100 2026-11-15 0
PostgreSQL / MySQL Connection Pool, RAM & Worker Concurrency Calculator Calculator 100/100 2026-11-14 0
Cloud GPU Rental vs. Buying a Local AI Rig Break-Even Calculator Calculator 100/100 2026-11-14 0
Cloud Object Storage & Egress Cost Calculator (AWS S3 vs. R2 / B2) Calculator 100/100 2026-11-14 0
Vector Database HNSW RAM, Disk & Quantization Sizing Calculator Calculator 100/100 2026-11-14 0
Multi-Provider LLM API Token Cost, Caching & RPM Headroom Simulator Calculator 100/100 2026-11-14 0