Motorized Smart Blind Torque and Tube Diameter Sizing Calculator
To find the correct smart blind motor, calculate torque using fabric dimensions, weight, tube radius, and a 20% to 50% safety margin. Typical small shades require 1.1 Nm on 25mm tubes, while medium to large blinds require 3 Nm to 20+ Nm on 35mm-60mm+ tubes.
Interactive Parameters & Live Verdict
Rule Diagnostics & Recommendations
Engineering Formula & Verification Notes
Calculations use fundamental physics for tubular shade rotation: Total Mass = Fabric Area (m²) × Fabric Weight (g/m²). Base Torque is derived by multiplying Total Mass by gravitational acceleration (9.81 m/s²) and tube radius (meters), adjusted for standard 85% drivetrain efficiency. A configurable safety factor (20% to 40%) is then applied to account for friction, bottom rail weight, and aging components.
Worked Engineering Example
Consider a motorized blackout roller blind with a width of 1,800 mm (1.8 m) and height of 2,200 mm (2.2 m). Fabric weight is 500 g/m² with a 40 mm tube diameter (radius = 0.02 m).
- Fabric Area = 1.8 m × 2.2 m = 3.96 m²
- Estimated Mass = 3.96 m² × 0.5 kg/m² = 1.98 kg (plus bottom bar)
- Base Torque = (1.98 kg × 0.02 m × 9.81 m/s²) / 0.85 = 0.46 Nm
- With a 30% safety margin, required torque = 0.60 Nm, fitting neatly into a 3 Nm or 1.1 Nm standard motor class.
Common Sizing & Compatibility Mistakes
Ignoring the correlation between tube diameter and torque can lead to structural failure or motor stall.
- Selecting motor torque based purely on width rather than factoring in fabric mass and tube radius.
- Failing to account for added friction in recessed windows or side channels.
- Mismatches between the motor crown/drive adapter and the internal profile of the roller tube.
Smart Blind Motor Class Benchmarks
| Shade Class | Typical Tube Diameter | Max Recommended Torque |
|---|---|---|
| Small Interior Shade | 25 mm | 1.1 Nm - 1.5 Nm |
| Standard Residential Blind | 35 mm - 40 mm | 3 Nm - 6 Nm |
| Large / Heavy Blind | 50 mm - 60 mm | 10 Nm - 20 Nm |
Frequently Asked Technical Questions
Why does tube diameter affect required motor torque?
Torque demand scales with the radius of the roller tube. A larger tube radius increases the leverage arm against which the motor must work to lift the fabric weight.
Should I include the bottom rail weight in my calculations?
Yes. While fabric area calculations cover the main shade body, adding an explicit safety margin accounts for the heavy metal or weighted bottom bar and side friction.
What power supply options are standard for smart tubular motors?
Common options include AC wired (for permanent installations), DC low-voltage power supplies, built-in rechargeable lithium-ion batteries, and solar panel trickle chargers.