Smart Lock Backset and Faceplate Strike Pocket Clearance Planner

Verified Nov 16, 2026 Quality 100/100 Confidence 100% 0 Evaluations
VERIFIED QUICK ANSWER

Verify standard smart lock compatibility instantly. Supports 2-3/8" (60mm) and 2-3/4" (70mm) backsets, door thicknesses from 1-3/8" to 2-1/4", and 1" edge bore requirements with precise strike pocket clearance checks.

Interactive Parameters & Live Verdict

Rule Diagnostics & Recommendations

    Engineering Formula & Verification Notes

    Compatibility is evaluated against standardized tubular and deadbolt smart lock installation specifications. Backsets must be exactly 2-3/8" or 2-3/4" measured straight from the door edge (faceplate front) to the spindle/cross bore center. Door thicknesses are validated across three standard hardware tiers (1-3/8", 1-3/8" to 1-3/4", and 2" to 2-1/4").

    Worked Engineering Example

    Consider a standard residential exterior door with a measured 2-3/8" backset, 1-3/4" door thickness, 1" edge bore, and 2.5" clearance between the lower knob trim and deadbolt center. Running these inputs through the planner confirms all metrics fall within standard smart lock operational thresholds, meaning out-of-the-box latch and screw configurations can be used immediately.

    • Backset of 2-3/8" matches out-of-the-box latch setting.
    • Thickness of 1-3/4" requires medium black screw sets.
    • Trim clearance of 2.5" exceeds the 2" minimum required for DoorSense and keypad housing.

    Common Sizing & Compatibility Mistakes

    Installers frequently commit errors by measuring backsets to the near edge of the cross bore hole rather than its absolute center, or measuring from decorative trim instead of the door edge itself. Another frequent issue involves ignoring strike pocket depth, causing the motorized deadbolt to stall against the strike box.

    • Measuring backset to the projecting latch tip instead of the flat faceplate front.
    • Neglecting to verify edge bore depth, leading to deadbolt binding under motorized torque.
    • Failing to account for custom or non-standard 60/68 mortise case configurations.

    Smart Lock Hardware Fit Benchmarks

    Smart Lock Hardware Fit Benchmarks
    Parameter Standard Requirement Tolerance / Action
    Backset 2-3/8" (60mm) or 2-3/4" (70mm) Adjust latch mechanism if switching
    Door Thickness 1-3/8" to 2-1/4" (35mm - 55mm) Select correct screw set length
    Edge Bore 1" (25mm) Diameter & Depth Ream/drill if undersized

    Frequently Asked Technical Questions

    How do I correctly measure my door backset?

    Open the door and measure horizontally from the front faceplate of the latch (the door edge) straight to the exact center of the cross bore hole. Do not measure to the latch tip or decorative trim.

    What happens if my backset is neither 2-3/8" nor 2-3/4"?

    Most consumer smart locks are built strictly around these two backsets. If you have a custom or antique door with a different dimension, you will need a specialized mortise conversion kit or professional door modification.

    Why is the trim clearance measurement important?

    A minimum 2" clearance between the top of your existing door knob/lever trim and the center of the deadbolt hole is necessary to fit modern smart lock keypads, interior battery housings, and external sensor modules like DoorSense.

    Did this interactive specification answer your scenario accurately?