Smart Thermostat Power Extender Kit (PEK) Compatibility Calculator

Verified Nov 16, 2026 Quality 100/100 Confidence 85% 0 Evaluations
VERIFIED QUICK ANSWER

The PEK is compatible with 24VAC systems lacking a C-wire, provided you have at least 4 wires (R, G, W, Y). It is incompatible with dual-transformer, millivolt, or high-voltage systems. The PEK works by digitally combining G and Y signals into a single wire at the thermostat, then separating them at the equipment. When using PEK, dual-transformer configurations are not supported.

Interactive Parameters & Live Verdict

Rule Diagnostics & Recommendations

    Engineering Formula & Verification Notes

    The PEK digitally multiplexes G and Y signals into a single wire to create a 24V circuit. Calculations assume standard 24VAC HVAC control logic.

    Worked Engineering Example

    A user has 4 wires (R, G, W, Y) and no C-wire.

    • The PEK module is installed at the HVAC control board.
    • The G and Y wires are combined into the PEK terminal.
    • The thermostat receives constant 24V power via the multiplexed signal.

    Common Sizing & Compatibility Mistakes

    Engineers and DIYers often overlook system voltage types.

    • Attempting to use PEK on high-voltage (120V/240V) baseboard heaters.
    • Ignoring dual-transformer setups (separate heating and cooling transformers).

    Wiring Requirements

    Wiring Requirements
    System Type C-Wire Needed PEK Compatible
    Standard 24VAC No Yes
    Dual-Transformer Yes No
    Millivolt N/A No

    Frequently Asked Technical Questions

    Does the PEK work with all smart thermostats?

    No, it is specifically designed for ecobee smart thermostats.

    What happens if I have fewer than 4 wires?

    The PEK will not function; you must run a new cable with a C-wire.

    Is the PEK safe for my HVAC board?

    Yes, when installed according to the manufacturer's wiring diagram.

    Did this interactive specification answer your scenario accurately?