Whole House Fan CFM and Intake Louver Sizing Calculator
For effective cooling, use the manufacturer's formula: Floor Area (sq ft) × 3 = CFM Fan Capacity. For a 2,000 sq ft home, this equals 6,000 CFM. For variable ceiling heights, use: House Volume × 0.375 = CFM. You require at least 1 sq ft of net free vent area per 750 CFM (Building America guideline). For a 6,000 CFM fan, this equals 8 sq ft of vent area. The evidence supports 2-3 CFM per square foot as a practical range, with 30 ACH being the maximum target for volume-based calculations, not the standard approach.
Interactive Parameters & Live Verdict
Rule Diagnostics & Recommendations
Engineering Formula & Verification Notes
Calculations use the industry-standard volume-based formula: (Volume × ACH) / 60. Net free vent area is calculated at a ratio of 1 sq ft per 750 CFM per Building America guidelines.
Worked Engineering Example
For a 2,000 sq ft home with 8 ft ceilings at 30 ACH:
- Volume = 2,000 * 8 = 16,000 cubic feet.
- CFM = (16,000 * 30) / 60 = 8,000 CFM.
- Vent Area = 8,000 / 750 = 10.7 sq ft of net free opening required.
Common Sizing & Compatibility Mistakes
Engineers often overlook the difference between gross vent area and net free vent area.
- Ignoring screen/louver obstruction: Net free area is usually 50-70% of gross vent size.
- Static pressure: Fans lose performance if attic exhaust is restricted.
- Insulation: Whole house fans create a thermal bridge; always use an insulated cover in winter.
Cooling Performance Benchmarks
| Target | ACH | Cooling Effect |
|---|---|---|
| Gentle | 15 | Quiet/Nighttime |
| Standard | 20 | Balanced |
| Rapid | 30 | Hot Climate Purge |
Frequently Asked Technical Questions
What is Net Free Vent Area?
It is the actual open space after accounting for louvers, screens, and frames that block airflow.
Why does ceiling height matter?
CFM is a measure of volume moved; higher ceilings increase total cubic footage, requiring more air movement.
Can I have too much ventilation?
No, but you can have too little. Insufficient exhaust causes attic pressure buildup, which reduces fan efficiency.