Motherboard Fan Header Amperage & PWM Splitter Calculator
Most motherboard headers are rated for 1A (12W) or 2A (24W). To stay safe, ensure the sum of all fan current ratings is below 0.8A to account for startup surges. If your total exceeds 1A, use a SATA-powered fan hub instead of a passive splitter.
Interactive Parameters & Live Verdict
Rule Diagnostics & Recommendations
Engineering Formula & Verification Notes
Calculations assume a standard 12V rail. The 80% safety threshold is applied to account for transient startup current surges which can be 2-3x higher than steady-state operation.
Worked Engineering Example
If you connect three fans rated at 0.35A each to a standard 1A header:
- Total current = 1.05A
- 1.05A > 1.0A limit
- Result: Incompatible. The MOSFET may overheat and fail over time.
Common Sizing & Compatibility Mistakes
Engineers often overlook the difference between steady-state and startup current.
- Ignoring startup surge: Fans draw significantly more power for a few milliseconds upon spin-up.
- Assuming all headers are equal: Pump headers often support 2A, while standard headers are 1A.
- Daisy-chaining too many splitters: Current adds up cumulatively regardless of the physical connection method.
Header Capacity Reference
| Header Type | Amperage | Max Watts |
|---|---|---|
| Standard Fan | 1A | 12W |
| High-Current/Pump | 2A | 24W |
| SATA-Powered Hub | Up to 4.5A+ | 54W+ |
Frequently Asked Technical Questions
Where do I find my header limit?
Check your motherboard manual under the 'Specifications' or 'Internal Connectors' section.
What happens if I exceed the limit?
The MOSFET controlling the header may overheat, degrade, or fail permanently, potentially killing the header.
Does a powered hub solve this?
Yes, a SATA-powered hub draws power directly from the PSU, using the motherboard header only for the PWM signal.