PC Liquid Cooling Radiator TDP & Delta-T Water Temp Calculator

Verified Nov 14, 2026 Quality 100/100 Confidence 96% 0 Evaluations
VERIFIED QUICK ANSWER

Under standard 1,200 RPM quiet fan airflow, each 120mm radiator section dissipates roughly 100–125W at a safe 10°C coolant-to-ambient Delta-T; a 600W combined CPU + GPU loop therefore needs at least two 360mm (or 360mm + 240mm) radiators to stay quiet and cool.

Interactive Parameters & Live Verdict

Rule Diagnostics & Recommendations

    Engineering Formula & Verification Notes

    Coolant-to-ambient Delta-T scales roughly linearly with heat load divided by radiator capacity at a given airflow pressure curve, anchored at empirical 10°C Delta-T radiator dissipation benchmarks.

    Worked Example: 550W Workstation Loop at 1,200 RPM

    At 1,200 RPM (~115W per 120mm section @ 10°C ΔT), 5x 120mm units (a 360mm + 240mm radiator) keep coolant Delta-T at ~9.6°C—holding water at ~33.6°C in a 24°C room.

    • Always pair high-fin-density radiators with high-static-pressure fans.
    • Never mix bare aluminum radiators with copper/nickel blocks in the same loop (galvanic corrosion).

    Common Liquid Cooling Sizing Mistakes

    Thick 60mm radiators do not beat slim 30mm radiators at low 800 RPM fan speeds.

    • Using PETG tubing on high-wattage AI/rendering loops that exceed 45°C coolant temperature.
    • Putting all radiators in exhaust-only orientation pulling pre-heated GPU case air.

    Radiator Cooling Capacity Guidelines (10°C Delta-T)

    Radiator Cooling Capacity Guidelines (10°C Delta-T)
    Radiator Setup Quiet (800 RPM) Balanced (1200 RPM)
    1x 240mm (2 units) ~170 W ~230 W
    1x 360mm (3 units) ~255 W ~345 W
    2x 360mm (6 units) ~510 W ~690 W

    Frequently Asked Technical Questions

    What is a safe coolant temperature for custom water cooling?

    Keep coolant below 40–45°C for long pump life and zero PETG deformation risk (or use EPDM rubber / acrylic PMMA tubing).

    Does radiator thickness matter more than length?

    No—surface area (360mm vs 240mm) improves cooling far more at quiet fan speeds than going from 30mm to 60mm thickness.

    What is the ideal rule of thumb per 120mm radiator section?

    Budget 100W per 120mm section for quiet operation, or 150W+ with louder high-RPM fans.

    Did this interactive specification answer your scenario accurately?