PC Case Push-Pull Fan Configuration & Airflow Calculator

Verified Nov 16, 2026 Quality 100/100 Confidence 95% 0 Evaluations
VERIFIED QUICK ANSWER

Real-world airflow is typically 50-80% of rated CFM due to resistance. Push-pull configurations increase effective pressure by ~12% over single-fan setups, helping maintain flow through radiators and filters. The calculator uses derate factors from CaseFlow (0.88 for open grille, 0.70 for dust filter, 0.62 for 27mm radiator, 0.50 for solid front) and applies a 1.12 multiplier for push-pull configurations, which adds pressure capability rather than doubling parallel flow capacity.

Interactive Parameters & Live Verdict

Rule Diagnostics & Recommendations

    Engineering Formula & Verification Notes

    Calculations use the derate factor method (CFM_eff = CFM_rated * Derate * PushPull_Multiplier). Push-pull adds ~12% to effective flow by overcoming resistance, not by doubling parallel capacity.

    Worked Engineering Example

    A 60 CFM fan on a 27mm radiator (0.62 derate).

    • Single fan: 60 * 0.62 = 37.2 CFM
    • Push-pull: 37.2 * 1.12 = 41.7 CFM
    • Takeaway: Push-pull provides a modest but critical boost for high-density fins.

    Common Sizing & Compatibility Mistakes

    Engineers often confuse free-air CFM with operating CFM.

    • Ignoring static pressure: High CFM fans often stall against radiators.
    • Mixing fan types: Using different RPM fans in push-pull causes turbulence and vibration.

    Restriction Derate Factors

    Restriction Derate Factors
    Mounting Derate Factor Best For
    Open Grille 0.88 Case Exhaust
    Dust Filter 0.70 Intake
    Radiator 27mm 0.62 Liquid Cooling
    Solid Front 0.50 Silent Builds

    Frequently Asked Technical Questions

    Does push-pull double airflow?

    No. It increases pressure capability, allowing the fan to maintain flow against resistance, typically yielding a ~12% gain in effective CFM.

    Why does my fan perform worse than the box says?

    Box ratings are 'free-air' (zero resistance). Real-world airflow is always derated by filters, grilles, and radiator fins.

    What is the best fan for a radiator?

    A fan with high static pressure (mmH2O) is required to push air through dense fin stacks.

    Did this interactive specification answer your scenario accurately?