PC Case Radiator Push-Pull & VRM Heatsink Clearance Calculator

Verified Nov 16, 2026 Quality 100/100 Confidence 100% 0 Evaluations
VERIFIED QUICK ANSWER

A standard radiator plus single fan stack requires 52mm-55mm of depth. Adding push-pull fans increases total depth to 77mm-95mm+, risking severe interference with motherboard VRM heatsinks, RAM, and EPS power cables.

Interactive Parameters & Live Verdict

Rule Diagnostics & Recommendations

    Engineering Formula & Verification Notes

    Stack depth is calculated by adding the bare radiator thickness to either one or two fan layers (standard 25mm thickness). Case compatibility is evaluated against manufacturer stated limits, while VRM interference is checked against standard 40mm thresholds for thick assemblies (>55mm).

    Worked Engineering Example

    Consider a build using a 38mm thick performance radiator paired with two sets of standard 25mm fans for a push-pull setup. The calculation yields 38mm + (25mm * 2) = 88mm of total stack depth. If your PC case specifies a top clearance limit of 57mm (such as an H7 Flow), this setup fails immediately by 31mm, highlighting why push-pull requires large specialized enclosures.

    • Radiator: 38mm
    • Push-pull fans: 50mm (two 25mm layers)
    • Total requirement: 88mm

    Common Sizing & Compatibility Mistakes

    Builders frequently assume that '360mm radiator support' guarantees physical fitment for any liquid cooler. In reality, manufacturer specs describe length and mounting patterns, ignoring depth. Furthermore, ignoring screw heads, vibration damping pads, and EPS power cable routing can trap fan blades or warp motherboard headers.

    • Confusing radiator length support with internal depth clearance.
    • Failing to account for tall DDR5 memory heatsinks or rear EPS 8-pin connector routing.
    • Not measuring distance from the top offset mounting rail to the actual motherboard surface.

    Radiator & Fan Stack Benchmarks

    Radiator & Fan Stack Benchmarks
    Configuration Typical Depth Common Clearance Risk
    Slim Radiator (27mm) + Single Fan 52 mm Minimal risk in standard ATX cases
    Performance Radiator (45mm) + Single Fan 70 mm Top RAM and VRM heatsink interference
    Thick Radiator (45mm) + Push-Pull Fans 95 mm Requires ultra-large cases (e.g., Corsair 9000D)

    Frequently Asked Technical Questions

    What is a push-pull radiator configuration?

    A push-pull setup places one layer of fans pushing air through the radiator and a second layer pulling air out the other side, aiming to improve static pressure and cooling performance.

    Why does push-pull fail in standard mid-tower cases?

    Most mid-towers provide 55mm to 65mm of top clearance. A push-pull assembly easily reaches 77mm to 95mm+, which collides directly with motherboard VRM heatsinks and RAM.

    How do I measure clearance accurately before buying?

    Measure the perpendicular distance from the top offset mounting surface down to the highest point on your motherboard (usually the VRM heatsink or EPS connector clip).

    Did this interactive specification answer your scenario accurately?