Solar EV Charging Surplus Calculator & CT Clamp Compatibility

Verified Nov 17, 2026 Quality 100/100 Confidence 95% 0 Evaluations
VERIFIED QUICK ANSWER

Calculate available charging current by dividing solar surplus (W) by voltage (230V) and phases. A CT clamp is essential to monitor real-time net energy flow and prevent grid import during solar-only charging modes. The formula surplus_watts / (charging_phases * 230) is supported by Monta's documentation, and CT clamp requirements are confirmed across multiple sources including Smart EV Chargers NZ, Monta, and Joosup.

Interactive Parameters & Live Verdict

Rule Diagnostics & Recommendations

    Engineering Formula & Verification Notes

    Calculations assume a standard 230V grid voltage. Available current is derived from P=IV. Surplus below 100W is generally ignored by smart controllers to prevent frequent relay cycling.

    Worked Engineering Example

    If your solar system generates 5kW and your home consumes 1kW, you have 4kW (4000W) of surplus.

    • Single-phase calculation: 4000W / 230V = 17.4A available.
    • Three-phase calculation: 4000W / (3 * 230V) = 5.8A available.
    • The charger will dynamically adjust the EV current to match this 17.4A or 5.8A limit.

    Common Sizing & Compatibility Mistakes

    Engineers often overlook the minimum current threshold of the vehicle's onboard charger.

    • Ignoring home battery priority: Home batteries often absorb surplus before the EV charger.
    • Phase mismatch: Attempting to charge on 3-phase when solar surplus is only available on 1-phase.
    • Missing CT clamp: The system defaults to grid-import mode without real-time monitoring.

    Reference Benchmarks

    Reference Benchmarks
    Scenario Requirement Margin
    Entry (1-Phase) 3.5 kW 16 A
    Standard (1-Phase) 7.0 kW 32 A
    Pro (3-Phase) 11.0 kW 16 A

    Frequently Asked Technical Questions

    Why is a CT clamp necessary?

    It measures real-time net energy flow at the main switchboard, allowing the charger to distinguish between export and import.

    Can I charge with solar only?

    Yes, if your charger supports 'Solar Only' mode and has a CT clamp to throttle current based on surplus.

    Does my home battery affect charging?

    Yes, most smart systems prioritize filling the home battery before diverting surplus to the EV.

    Did this interactive specification answer your scenario accurately?